Проектирање, изведба, продажба, инсталација и одржување на водоводните системи, како и на системите за мерење и филтрација на вода со 24-часовна техничка поддршка.

 
 
 
 
 
 

Beulco Quickturn valves

In new buildings or in case of renovations of existing buildings: installations in narrow places, possibly overhead, are often a real challenge for all participants – planners, subcontractors, managing personnel and municipal utility suppliers.

 

Beulco Quickturn plunger valves offer an ideal solution. Extremely low installation heights make planning and mounting an easy job. It only takes a few turns for the valve to completely open or close. Replacing or maintaining the valve upper parts is not necessary, since all the functional elements of the assembly are maintenance-free. 

Features:

  • Pipeline closing without water-hammer effect, quickly and safely
  • Later replacement of the valve upper part has been dropped

Advantages:

  • Easy operating by ergonomically formed wheel (knob)
  • Quick operating with only a few turns from fully ON to fully >OFF position
  • Turning direction is shown on the knob
  • Label on the knob may be customized for clear marking of the pipelines
  • Non-rising upper part
  • All the plunger valve functioning parts are maintenance-free (permanent lubricating film)
  • Upper part without clearance volume
  • Manner of installation on request
  • Low installation height
  • The sealing piston is resistant against accumulation of deposits owing to a special profile

Features:

  • Nominal size: DN 15 to DN 50
  • Suitable for drinking and heating water
  • Max. operating pressure: 10 bar
  • Max. operating temperature: 90°C
  • Blue turning knob is made of mineral-fibre reinforced plastic
  • Massive sealing piston with double sealing EPDM-coating
  • Valve housing made of antimicrobial brass, in accordance with the drinking water standard DIN 50930, part 6, item 8.5, from 01/01/2003
  • Transient values in accordance with DIN 3546, part 1 and DIN EN 1213 for volumetric flow rate class Vb
  • All used materials acc. to KTW-recommendation

  

 
 
 
Ако сте заинтересирани за повеќе, ве молиме контактирајте не на телефон +389 23 130 293 или преку онлајн формуларот.
 
 
 

Пребарувач

 
 
 

контакт

ЦМЦ ГРОУП д.о.о.
Република Северна Македонија
Ул. Борис Трајковски бр. 280
1000 Скопје

T: + 389 23 130 293
F: + 389 23 130 285
E: contact@cmc-group.mk